manualshive.com logo in svg

Cradlepoint IBR350, Руководство пользователя

Поделиться
Скачать
Cradlepoint IBR350 Скачать руководство пользователя страница 13

©2016 Cradlepoint. All Rights Reserved.  

|

  +1.855.813.3385  

|

  cradlepoint.com

13

User Manual  

/

  IBR350

5/6/16

CONNECTION MANAGER

The router can establish an uplink via Ethernet or 3G/4G modems (removable or external USB). If the primary WAN 
connection fails, the router will automatically attempt to bring up a new link on another device: this feature is called 

failover

. If Load Balance is enabled, multiple WAN devices may establish a link concurrently.

This is a list of the available interfaces used to access the Internet. You can enable, stop, or start devices from this 
section. Drag the priority icon (   ) up or down to set the interface the router uses by default and the order that it 
allows failover. 

WAN INTERFACE PROFILES & PRIORITY

ON DEMAND

Typically, modem connections are not always on. When the On 
Demand mode is selected a connection to the Internet is made 
as needed. When On Demand is not selected a connection to the 
Internet is always maintained.

Availability Key

Enable

On Demand

WAN Verify

Data Usage

Failback

Standby

STANDBY

Standby is used to decrease failover time from one WAN interface to another. When Standby is enabled for a WAN 

profile or interface, the relevant interfaces are kept in a connected-but-idle (minimal, non-routed traffic) state. When 
the current WAN connection is disrupted, the traffic will failover to the next priority WAN. If that interface is on 

Standby, the connection is already established and failover will take much less time.  

Note that the current connected interface(s) is/are indicated by a green connection state. For interfaces on Standby, 
the interface is indicated by a yellow connection state. If the interface is indicated in red, the interface is not currently 
connected or in Standby.

Standby is used to enable faster failover times only. If you want to manage traffic to a specific WAN interface, you 
will need to use WAN Affinity. If WAN Affinity is enabled for a particular profile or interface, do not enable Standby for 
that profile or interface as the failover results may vary and be unexpected.

Содержание IBR350








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды