CRADLEPOINT
CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 59
Interfaces:
Select network interfaces to attach to this network.
On the
CBR450, you must select the available Ethernet port in
order to connect to the network.
You may also add a
configured VLAN interface. Double-click on interfaces shown
on the left in the
Available
section to move them to the
Selected
section on the right (or highlight an interface and
click the + button). To deselect an interface, double-click on
an interface in the
Selected
section (or highlight the interface
and click the
– button).
If you want more VLAN interface options, you must configure
these separately. See
VLAN Interfaces
in the
Local
Network Interfaces
section below (on this same
administration page:
Network Settings
→ Local Networks
).
Access Control:
Tune the access control settings of this network to match the
intended use. Simply select or deselect any of the following:
LAN Isolation:
When checked, this network will NOT
be allowed to communicate with other local networks.
UPnP Gateway:
Select the UPnP (Universal Plug and
Play) option if you want to enable the UPnP Gateway
service for computers on this network.
Admin Access:
When enabled, users may access
these administration pages on this network.
Содержание CBR450
Страница 1: ......
