CRADLEPOINT
CBA750B | USER MANUAL Firmware version 5.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 106
Network Selection Mode:
Wireless carriers are assigned unique network identifying codes known as PLMN (Public Land
Mobile Network). To manually select a particular carrier, select the Manual radio button and enter the network PLMN.
Functional Mode:
Selects the functional mode of the modem. IPPT mode causes the modem to act as a transport,
passing Internet data and IP address information between the modem and the Internet directly. NAT mode causes the
modem to NAT the IP address information. Consequently, IPPT mode does not allow user access to the modem web UI
and NAT mode does allow user access to the modem web UI.
AT Config Script:
Enter the AT commands to be used for carrier specific modem configuration settings. Each command
must be entered on a separate line. The command and associated response will be logged, so you should check the
system log to make sure there were no errors.
NOTE: AT Config Script should not be used unless told to do so by your modem's cellular provider or by a support technician.
AT Dial Script:
This is included for legacy devices
only
. Most users will not use this option. Go to
SIM/APN/Auth
Settings
instead if you need to select a specific Access Point Name.
If you do need this option for older devices, enter the AT commands to be used in establishing a network connection.
Each command must be entered on a separate line. All command responses must include “OK” except the final command
response, which must include “CONNECT”.
Example:
AT
ATDT*99***2#
Содержание CBA750B
Страница 1: ......
