www.cr-gps.com
Page 17 of 20
Revision: V2.0.1-January 2016
6.4.2 Recover oil circuits
The position server or the managers can send recover-fuel-circuit commands to the terminal when
needed, the terminal will recover the fuel circuits of the vehicle.
Ⅶ
. Terminal Alarm
■7.1 Speed Alarm
Conditions: When the vehicle over and below the set speed.
Note: You need to set the low speed limit and high speed limit
.
■7.2 Geo-fence Alarm
Conditions: when the vehicle entry / exit / across the Geo-fence.
Note: You need to set the conditions of crossing fence, fence types and so on.
■7.3 Power disconnect Alarm
Conditions: When the device is disconnected from external Power.
Ⅷ
. Terminal Setting
Please refer to the <Operation Commands>
Ⅸ
. Trouble shooting
■9.1 Cannot connect platform