CPS Tech-Set TR19 Series Скачать руководство пользователя страница 3

3

GENERAL SAFETY INSTRUCTIONS

Please read, follow and understand the contents of this entire manual, with special 

attention given to Danger, Warning and Caution statements. 

FOR USE BY PROFESSIONALLY TRAINED AND CERTIFIED OPERATORS ONLY. 

MOST STATES, COUNTRIES, ETC., MAY REQUIRE USER TO BE LICENSED. 

PLEASE CHECK WITH YOUR LOCAL GOVERNMENT AGENCY.

DANGER:  

The recovery tank used with this contains liquid refrigerant. Overfilling 

recovery tank may cause a violent rupture resulting in severe injury or even 

death. 

As a minimum, please use a scale to continuously monitor 

recovery tank weight.

DANGER:   EXPLOSION RISK! 

This unit is not certified as ‘explosion proof’ for explosive 

rated environments. It is only to be used in normal environments.

DANGER:

  

ELECTRICAL SHOCK HAZARD: 

Always disconnect power source when 

servicing this equipment.

WARNING:  

Do not use equipment in the vicinity of spilled or open containers of gasoline 

or other flammable substances. 

WARNING:

  All hoses may contain liquid refrigerant under pressure. Contact with 

refrigerant may cause frostbite or other related injuries. Wear proper personal 

protective equipment such as safety goggles and gloves. When disconnecting 

any hose, please use extreme caution.

WARNING: TO REDUCE RISK OF FIRE: 

Avoid use of an extension cord because 

extension cord may overheat. If you must use an extension cord, use 10 awg 

minimum.

WARNING:

  Avoid breathing refrigerant vapors and lubricant vapor or mist. Breathing high 

concentration levels may cause heart arrhythmia, loss of consciousness, or 

even cause suffocation. Exposure may irritate eyes, nose, throat and skin. Please 

read manufacturer’s Material Safety Data Sheet for further safety information on 

refrigerants and lubricants.

WARNING

:  Make certain all safety devices are functioning properly before operating 

equipment.

CAUTION:  

To avoid cross contamination of refrigerant and potential leakage to the 

atmosphere, proper hoses and fittings should be used and checked for 

damage. 

CAUTION:

   To avoid overfilling refrigerant tank, read and follow manufacturer’s 

recommended filling instructions for refrigerant being recovered.

CAUTION:

   This equipment is intended for use of one refrigerant at a time. Mixing of 

different refrigerants will cause your recovered supply of refrigerant to become 

contaminated.  

Note: It is very expensive to destroy mixed or damaged refrigerants.

www.

.com

[email protected]

1.800.561.8187

Содержание Tech-Set TR19 Series









Отзывы: