
9
www.cpsystem.co.kr
CABLE PROTECTION SYSTEMS FOR ROBOT!
1
RKTP is assembled by connecting the two
half-circled guards.
2
Be sure to line up holes neatly for bolt
insertion.
3
Tighten the bolt after inserting nut as
shown with allen wrench.
4
All nuts and bolts are supplied with RKTP.
1
When you've decided on a position, connect the
grooves in RKS to the ones on the conduit as shown.
2
Line up the holes after connecting both
halves to ensure smooth bolt entry.
3
Tighten bolt after inserting nut into engi-
neered hole as shown with allen wrench.
4
Be sure to insert the bolt and nut all the
way into the hexagonal slots as this will
ensure a tight seal.
RKTP
Assembly
RKS
Assembly