Common Part List
WARRANTY & REPAIR POLICY
CPS warranties the FX Series Refrigerant Management Centers are free of manufacturing defects. If a component should fail due to
manufacturing defect during the first year in service, it will be repaired or replaced (at our option) at no charge. During the second year, parts
failures caused by defect are covered under warranty. CPS will replace any failed part at no charge. Some failed parts must be returned to
CPS. Labor time and mileage are not covered during the second year in service. CPS will cover the compressor for five full years of service,
limited to the cost of the compressor only. Failed compressors will require return to CPS.
This product is warranted to be free from defects in workmanship, materials, and components for a period of one year from the date of purchase.
All parts and labor required to repair defective products covered under the warranty will be at no charge. The following restrictions apply:
•
The limited warranty applies to the original purchaser only.
•
The warranty applies to the product is normal usage situations only, as described in the Operating Manual. The product must be serviced
and maintained as specified.
•
If product fails, it will be repaired or replaced at the option of the manufacturer.
•
Transportation charges for warranty service will be reimbursed by the factory upon verification of the warranty claim and submission of a
freight bill for normal ground service. Approval from the manufacturer must be obtained prior to shipping to an authorized service center.
•
Warranty service claims are subject to authorized inspection for product defect(s)
•
The manufacturer shall not be responsible for any additional costs associated with a product failure including, but not limited to, loss of
work time, loss of refrigerant, cross-contamination of refrigerant, and unauthorized shipping and/or labor charges.
•
All warranty service claims must be made within the specified warranty period. Proof-of-purchase date must be supplied to the
manufacturer
•
Use of recovery/recycling equipment with unauthorized refrigerants or sealants will void warranty
•
Authorized refrigerants are listed on the equipment or are available through the Technical Service Department
This Limited Warranty does NOT apply if:
•
The product, or product part is broken by accident.
•
The product is misused, tampered with or modified.
•
The product is used for recovering or recycling any substance other than the specified refrigerant type.
MAINTENANCE AND CARE
PARTS LIST AND WARRANTY
Service Mode
This mode should only be entered with direction by technical support or by an authorized service center. This mode enables the testing
of each device controlled by the FX Series’ computer. These devices include the ball valves, vacuum pump, compressor and pressure
transducers. This mode can be located in the “Maintenance Mode”
Field Software Update
Updates to the system software will require use of this mode. Found in the “Maintenance Mode”, an update password and the new software
file installed on a USB drive will be required. Insert the USB stick with the new software update file into the USB port on the back of the
control panel. Go to the and select Follow the displayed directions. Be sure power remains on during this operation.
Display Calibration
Under certain conditions the touch screen may lose its calibration (i.e., touches on the screen don’t result in the desired result). If pressing
a function on the screen does not actuate the function, or engages an adjacent function, the screen needs to be calibrated. To do so, turn the
machine’s power off. Then while pressing and holding any spot on the touch screen turn the power back on. A screen set up menu will be
displayed. Select screen calibration and follow the on-screen directions.
Part Number
Description
FX3030X1
FX Series Maintenance Kit—Filter, Vacuum Pump oil and Coupler O-rings
Buy locally
Printer Paper—2.25” x 50’ Thermal Sensitive Paper
QCL1234
Low Side 1234yf Coupler
QCH1234
High Side 1234yf Coupler
QCL134
Low Side R134a Coupler
QCH134
High Side R134a Coupler
AR2788X14B
¼ SAE/High Side R134a tank refill adapter
AR2788X14A
1/2 ACME High Side R134a tank refill adaptor
FA1233X35
1/2 ACME LH/High Side R1234yf tank refill adaptor
CRX400T
50lb Recovery Tank
481500
Oil Injection Kit - R-134a
481500yf
Oil Injection Kit - R1234yf
