CPS CL230, Руководство пользователя

Страница: 19 / 24

CL230 User Manual Page 19
3. OPERATION
3.10 LCD Back Light
Press

to select LCD back light
3.11 Keypad Lock
Press

followed by
▲
to activate keypad lock, The LCD will display “KEYLOCK” and all
keys are disabled except PTT, Monitor and Emergency button. Press

followed by
▼
to
deactivate keypad lock.
3.12 Software Programming
Connect the radio to the computer through the programming cable (via microphone port),
press and hold
 while turning on the radio until “PROGRAM” is displayed and start to
program. Upon completion, turn off the radio, disconnect the programming cable and turn
on the radio again to return to normal operation. “APO” icon will blink indicates
programming is ready to begin, LCD back light will be on during the programming.
3.13 Programming at Menu Mode
Press and hold

for about 3 seconds to enter the Menu mode, which has the following
selection sequence:
VOX_ EN (VOX ON / OFF)

SAVE (Battery save ON / OFF)

SCAN (Scan function ON / OFF)

DTMF (DTMF ON / OFF)
Press
▲ or ▼ to select and 
to confirm selection( if no selection is confirmed after 10
seconds, the radio will automatically exit the Menu mode with saving.)
SQUELCH (Squelch): Select level between 0
– 9 (default: 2)
Sound (Key sound): Select SOUND_ON (default) or SOUNDOFF
VOX_TH (VOX Sensitivity0: Select level between 1
– 9 (default: 3)
VOX_ EN (VOX ON / OFF): Select VOX_ON or VOX_OFF (default)
SAVE (Battery save ON / OFF): Select SAVE_ON (default) or SAVEOFF
SCAN (Scan function ON / OFF): Select SCAN_ON or SCANOFF (default)
DTMF (DTMF ON / OFF): Select DTMF_ON or DTMFOFF (default)
3.14 Cloning
To copy the contents from one radio to another radio.
1. Connect the Source Radio and Receiving Radio by Cloning Cable.
2. Press and hold PTT while tur
ning on the Source Radio until the LCD displays “CLONE”
3. Press and hold

while turning on the Receiving Radio until the LCD displays
“PROGRAM”
4. Press

of the Source Radio for cloning, The Source Radio will display “CLON OK”
upon completion.
5. Disconnect the Cloning Cable