Diagram B
Inlet
Outlet tubing to sump, tank, or overflow
Air Nipple
Diagram A
*Aqua Lifter and lid included in Deluxe models
*Lid (not shown)
Страница 1: ... overflow as far away from the inflow as possible to reduce turbulence It is also important to check the capacity of your sump as well as the flow rate of your return pump on your filtration system to prevent possible overflow It will be necessary to add water to the system after it begins running The amount of water that you will need to add will depend on the sump size and design 3 Assemble the ...
Страница 2: ... airline that came with your overflow Attach one end to the air nipple on top of the overflow and a check valve on the other end to prevent air from being drawn in through the airline You will need to initially draw out the air using a Venturi powerhead or your mouth and you will need to periodically draw out any air that accumulates d Gravity siphon Attach a long air line to the nipple on the ove...
Страница 3: ... flow rates there will be a flushing noise coming from the overflow This noise is caused by air trying to escape back up through the bulkheads while the water is going down The enclosed vent tubes will help reduce the level of noise Place the tubes through the small holes in the pre filter screens and adjust them up or down until you find the point where the noise is reduced the most Slide the sma...
Страница 4: ...Diagram B Inlet Outlet tubing to sump tank or overflow Air Nipple Diagram A Aqua Lifter and lid included in Deluxe models Lid not shown ...
