CPMG Magma M4, Руководство владельца/оператора

Страница: 10 / 48

10
Automatic Temperature Control Setting
Loading Empty Tank
All material must be clean. Keep all foreign matter out of melting tank.
1)
Open the material door (1) and place slab or biscuit (2) on the open door against the
holder (3).
1
2
3
The control system on your CIMLINE “M” series melter has been factory set to run the most
common types of materials. These Materials have an application temperature of 380 deg F.
With some materials, it may be needed to change the controller to achieve the appropriate appli-
cation temperature. To achieve this, open the control box and alter the material controller (top
controller) by following the directions below.
Increase (UP)
Decrease (DOWN)
(A)
1) Press the SET button.
2) SP1 is displayed.
3) Press the SET button.
4) Current Temperature is displayed.
5) Use the arrow buttons to change to the desired temperature.
6) Press the SET button.
7) Let the controller time out. Your controller will now be change and the updates will
be saved.