background image

OPTIONS AND FEATURES, continued 

 
 

Features 

(cont’d) 

Auto 

Fault 

Recycle 

    

   

Internal test points for ease of maintenance 

   

MTTR < 1 hour 

 

 

 

   

 

   

Also available in 400 Watt C-Band  

   

and 400 W X-Band   

 
 

Characteristics and performance limits are based on current data and are subject to change without 

notice.  Please contact CPI Satcom Division before using this information for system design.

 

 
   

 

ACCESSORIES 

 

Several optional accessory items have been designed for use with CPI Ku-band CMPAs. 
Brief descriptions of the items now available are given on the following paragraphs. 
 

Protection Switching 

 
The Switching System consists of an output waveguide switch, dummy load and local 
control unit. These assemblies are usually mounted on the upper part of a rack/cabinet 
intended to house the two CMPAs. The circuit provides 1:1 redundant protection with 
automatic transfer, or manual operation (local or remote) as selected by the operator. For 
servicing, the logic assembly can be removed from the front panel without disturbing the 
RF connections. Options are available for the addition of an input power divider or a 
ganged input transfer switch. 

 
Phase Combining 

The Phase Combiner consists of a coaxial input divider network and phase shifter and an 
output waveguide combining system. The combiner is an electrically operated variable-
ratio hybrid, which provides the following operating modes: 
1)   PA1 and PA2 combined on line   

 

 

2)   PA1 on line, PA2 to dummy load  

 

 

3)   PA2 on line, PA1 to dummy load  

 

 

4)  PA1 and PA2 combined to dummy load 
 
In the normal combining mode a fault in one PA will automatically index the combiner to 
mode (2) or (3), providing the "soft fail" protection of full output from the surviving PA. 
In the manual mode the operator may select by push-button any one of the four operating 
modes. 
 
The combiner assembly is packaged in a 19-inch rack-mountable enclosure measuring 7 
inches high and 24 inches deep. 

Ku-Band CMPA  04/08 

 

TD-67  Page 13 

Содержание VZU-6994


























Отзывы: