IST-3402.PT13.02/A
AC999/ User instruction
Pag.7/16
CPF Industriale S.p.a
Via Enrico Fermi 98 Gussago ( BS )
Tel: 030/31 04 61 Fax: 030/310465
2.2.4.
NOMINAL PRESSURE
Press “
ENTER
” to enter the menu for configuring the nominal
pressure (the pressure at which the extinguisher is filled).
To edit the nominal pressure, press
▲or▼ and then “
ENTER
” to
confirm.
2.2.5.
PRESSURE TEST
Press “
ENTER
” to display “
SER. NO.:00000000
”
Insert the extinguisher’s serial number, pressing ▲▼ to change
each digit, and then press “
ENTER
” to confirm and move on to
the next digit.
The pressure appears on the display when you have
inserted the full serial number.
Connect the instrument to the extinguisher valve and press
“
HOLD
”.
“OK”
appears if the test is successful, or
“LOW”
if it is not.
Press
“PRINT”
to print the test result on a receipt
Press
“ESC”
and you are asked whether to save the
data:
press “
ENTER
” to save the data on the memory, or
“ESC”
to
return to the previous page.
2.2.6.
READING THE MEMORY
It is possible to display previous tests. Any saved data is
displayed at point 6 of the “
Menu
”, where it is shown in
chronological order. You can scroll through the data with the
▲▼ arrows. Press “
ENTER
” again to display the date, SN
and test result.
Press “
ESC
” to return to the menu.
2.2.7.
ERASE THE MEMORY
This function allows you to erase the entire memory (tests and
data). Press “
ENTER
” and you are asked to confirm whether to
proceed. Press “
ENTER
” again to erase the memory definitively.
2.2.8.
PC DATA
PC connection menu
CONNECTI
NG…
7.E R A S E
MEMORY
6.READ
MEMORY
n . 3
28 / 02 / 10
+
1 4 . 0
bar
OK
4.. NOMIN
AL PRESS
P NOM:
1 4 . 0 bar
5. PRESSU
RE TEST
SAVE
DATA ?
Ext. SN:
00000000
+ 1 5 . 0
Bar
M
+ 1 5 . 0
Bar
OK
