8
ENGLISH
100361
1 . Position the mounting rail on the wall at a convenient
height .
2 . Use a bubble level to ensure the mounting rail is
horizontal .
3 . Mark hole centre locations on the wall .
Install Mounting Rail to Masonry Wall
Install Mounting Rail to Masonry Wall Cont’d
ASSEMBLY
Ensure there are no live electric wires or plumbing
in the wall where you mount the hose reel .
WARnInG
Always use eye-protection when using power tools .
WARnInG
Carefully remove all parts from the packing box .
Locate all hardware and components before
installation .
nOTICE
Do not completely tighten bolts until assembly is
completed . For easier assembly, we recommend that
two people assemble this product .
nOTICE
4 . Using a 13mm (½ in .) masonry drill bit, drill
approximately 3 .8cm (1 .5 in .) deep centered on the
marks you made in step 3 .
3.8cm
5 . Using a hammer, lightly tap the masonry anchors into
the holes, being careful not to damage them, until
fully seated . Remove the nuts and washers .
6 . Hang the mounting rail onto the exposed anchors .
7 . Replace the nuts and washers, tightening them with
a wrench .
