Overview
The EBR-MINPIR-DALI presence detector provides
automatic control of lighting. It is connected to the Rapid
DALI Gateway via a DALI network.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty.
An adjustable internal light sensor provides light level
information to the Rapid system to allow lights to be kept
off if sufficient daylight is present, and to enable maintained
illuminance for dimming systems.
An integral IR sensor in the unit allows the unit to be
commissioned, and used in conjunction with a remote
control handset (part no: UHS) to:
Act as a conventional dimmer
Override the unit on or off
This detector is ideal for mounting in chill beams or
continuous run lighting.
DALI network miniature PIR with photocell
EBR-MINPIR-DALI
Product Guide
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes
R
ed to indicate the following:
Walk Test LED active
when movement is detected
Valid setting received
Sensor head
PIR lens
which covers...
IR Receiver
Light Level Sensor
Status LED
Features
