CZ-629 Assembly Instructions
Box 1
Box 2
Box 3
STEP 1:
CZ-629 massage chair arrives in three boxes. The seat base is packed in Box 1, the
backrest packed in box 2, the two side panels packed in box 3.
STEP 4:
Remove the backrest from box and attach it to the seat base. DO NOT rest it on the
floor vertically otherwise damage to the backrest bracket will occur. Remove protect-
ing materials of backrest data plug and air hose.
STEP 7:
Recline the backrest lightly until you hear a “click” .
STEP 8:
Take the side panels out of box. Pull the strip of cloth to detach the side panel cover.
STEP 5:
Make sure the seat is at its most upright position when resting the pivot pin to the
cradle point on the seat base.
STEP 6:
Push the backrest forward in order to get more space.
Use bolt and split pin to attach the backrest actuator and backrest together.
STEP 2:
Carefully remove the seat base from box, discard all the protective materials, lay the
backrest pad on the seat, and set the tablet holder and component box aside.
STEP 3:
Cut the cable tie which temporarily fasten backrest actuator. Discard protective
material on the head of backrest actuator. Remove the split pin and bolt and set aside.
Connect the backrest air hose to the air pump box, and connect the backrest dataplug
into the corresponding socket on the electrical control box.
