Use and Care Manual
12/13
Wellness for Home
Full body Auto massage program
7. GENTLE
8. RELAX
9. THERAPY
10. VIGOROUS
11. DEMO
12. GMAX
13. FULL BODY
14. STRETCH
Note:
Under auto massage program, it will automatically scan the backrest and adjust the
position of shoulder.
15/16. Upward/Downward adjustment
The position adjustment button for spot and partial massage.
When the spot and partial massage function are activated, this button can be used to move the
massage rollers.
Hold this button to move the massage rollers upward/downward respectively. Release the
buttons when reaching desired position.
Note: When the auto massage program is engaged, it will scan the back length automatically
which will set the highest position. The position can be adjusted by pressing these two buttons
after hearing beep.
17/18.“ + - ”
Under Manual or Auto massage program, press”+/-” can control the mode of speed and
strength. Every single press on these two buttons will change the speed and strength interval
in the sequence of "LV1>LV2>LV3>LV4>LV5" in cycle.
19. FULL BACK
Press this button once,massage chair will move into the preset position.Then back and hip can
achieve special massage function.Press the button again to cease the function but chair will
not restore to the original position.
Note:
Under auto massage program, press
KNEADING,SWEDISH,APPING,SHIATSU,CLAPPING or ROLLING button can switch to FULL
BACK massage function.
20. FULL AIR
The auto full body air function start/stop control button.
Press this button to activate a full body air pressure massage. Press the button again to cease
the function.
Note:
Once press Manual Air button, it will switch from Full Air function to manual air function.
21. FOOT ROLLING
Foot rolling function Start/Stop Control Button
Press this button once to activate rhythmic rolling massage at soles, press this button again to
stop rolling massage at soles.
Note:
During Auto Program mode, pressing this button can also disable/enable the Foot
Rolling function.
22. VIBRATION
Seat Vibration function Start/Stop Control Button
Press this button once to activate rhythmic seat vibration function, press this button again to
stop the Vibration function.
Note:
During Auto Program mode, pressing this button can also disable/enable the Vibration
function.
23. HEAT
Lumbar Heat function Start/Stop Control Button
Press this button to activate lumbar heat function, press this button again to stop the Heat
function.
Note:
During Auto Program mode, pressing this button can also disable/enable the Heat
function.
