Cozzia CG-5000, Руководство по техническому обслуживанию

Страница: 6 / 11

4: Guidance of change the actuator
A: Locate the zipper head at the back of the chair. Unzip it to the end. Then we detach the backrest pad
from the backrest frame. Then rest the pad as the picture show. ( As pictures below show )
B: Under the seat pad there is a zipper. Unzip it to the end. Use a diagonal pliers get rid off the cable tie
which fasten the heater wire and actuator wire. ( As pictures below show )
C: Locate the actuator wire connecter at the back of the seat. Pull the wire out. Then use diagonal pliers
to get rid off the cable tie which secure the connecter. Then disconnect it.
Locate the zipper head. Zipper had been unzipped. Backrest pad has been
rested onto seat pad.
Locate the zipper head.
Locate the cable tie.
Locate the actuator
wire connecter. The wire has been
pulled out.
Locate the actuator wire
connecter.