Release the child car seat from the
passenger seat belt. Flip over to the back
side of the child car seat.
Open the protective flap at the back of
seat. Detach the Velcro fastener and
release the harness straps from the
harness yoke.
Pull these out of the belt slots and release
the support backrest cushion from the
backrest of the child car seat.
Return and close the protective flap.
Turn the child car seat over and locate the
three metal retainers attached to opposite
ends of the crotch strap and hip straps.
Turn the metal retainers so that the short
side will pass through the slots to the front.
Release all the three metal retainers to
detach the crotch strap and hip straps and
remove the support seat cushion from the
child car seat.
Pull the whole length of harness adjuster
strap to tighten. Fold the strap underneath
the base.
Store away all dismantled component
including the whole set of harness buckle
and the cushions. It is obligatory to reinstall
them should the car seat need to be
re-used as Group 1.
To Remove the 5-Point Harness (Group 2)
To reinstall, follow the instructions described above in reverse order.
14
Group 2
Infiniti 1/2/3
PULL
