1. When the charging case is not plugged into the USB charging state,
open the charging case, the earbuds are powered on automatically.
The blue light flashes, until the left and right earbud are automatically
paired.
1. Put the earbuds into the charging case and close the cover, the
earbuds will automatically power off.
* If the left or right earbud isn't connected to the device for about 5
minutes, the earbuds will automatically power off.
1. Open the charging case and remove the earbuds;
2. The left and right earbud automatically turn on and pair. Until the left earbud light off, the right earbud flashes red and blue
light alternately, the earbuds pairing is successful;
3. Open the device Bluetooth search "KY03" and click to finish connect;
4. If the connection fails, put the earbuds back in the charging case and repeat the above steps.
NOTE
1. If the earbuds are currently or had already been connected to a Bluetooth device, click "forget" or remove "KY03" from your
Bluetooth settings and turn off Bluetooth on your device.
2. Put the earbuds into the charging case, plug in the charging cable to charge the earbuds, then press and hold the touch
panel for 5 seconds, blue light flashes three times to clear the Bluetooth pairing record.
3. Then unplay the USB cable and close the charging case,repeat daul mode steps.
1. Take the right earbud out of the charging case and turn on automatically; Until the red
and blue lights alternately flash into pairing mode.
2. Open the device Bluetooth search "KY03" and click to finish connect.
3.If the connection fails, put the earbuds back in the charging case and repeat the above
steps.
NOTE
Only right earbud can be used as single mode.
* After the first connection, the earbuds will automatically connect back to the last-paired
device (Device Bluetooth needs to be turned on).
Support IOS/Android mobile phone displays the earbuds battery level near the upper right corner of the screen.
-5-
KY03
Содержание KY03
Страница 1: ...KY03 User Guide...