Coway CHPI-620L, Руководство пользователя, Страница: 10 / 32

PLEASE CHECK BEFORE USE
Open the main water supply valve.
The main water supply must be turned on for the product to run normally.
When the indicator in the indication part is turned off.
When the indicator in the indication part is turned off, check if the power supply was
shut off due to power failure or other causes.
When the user has not used the product for a long time
When the user has saved water for a long time or has not used water for a while, drain
the water inside the water filtration device completely, and rinse the water tank with the
newly filtered water one time before use.
After installing the water filtration system
Following the product installation, make sure the water tank is emptied or the water is filtered for
50 minutes or longer. (Empty the water tank filled with filtered water two times or more.)
Regular filter replacement
It is very important to replace the filter regularly to maintain the intended water quality.
If the filter is used beyond its service life, the performance of the water filtration device will
deteriorate. Take note of the filter replacement cycle.
When the user does not want to use product for an extended period
Close the main water supply valve and unplug the power cord.
Please check before use!
This water filtration unit must be plugged into
its own dedicated 240 V~ 50 Hz, AC only electric outlet.
It must be plugged into a grounded 240 V~ 50 Hz outlet.
It must be connected to a correct power source for the product to run normally.
Tips
Close the main water supply valve and unplug the power cord.
09