Coway CHP-6200N, Руководство по эксплуатации продукта, Страница: 27 / 32

26
25
HO
W
T
O
REPL
A
CE
FIL
TER
/ TROUBLESHOO
TING
O
thers
TROUBLESHOOTING
Symptom Check Measures to take
Water tastes strange.
• Isn’t it time for filter replacement? Please request for filter replacement.
Water is not being
dispensed.
• Is the device disconnected from the water supply
or is the tap water supply valve locked?
Open the tap water supply valve.
• Did you miss the filter replacement period? Please request for filter replacement.
Amount of water
filtration is much
lower than before.
• Isn’t it time for filter replacement? Please request for filter replacement.
• Is the power connected?
Check that the power cord is plugged into a
220 V - 240 V~, 50 Hz outlet.
• Is the tap water supply valve locked? Open the tap water supply valve.
• Has the temperature of tap water gone down
rapidly?
The amount of water filtration decreases as water
temperature drops.
Cold water is not
being dispensed.
• Is the cold water indicator turned on?
Press the cold water button for 3 seconds to turn on
the cold water function.
• The cooling unit does not seem to work. Please request for repair service.
• Is the power connected?
Check that the power cord is plugged into a
220 V - 240 V~, 50 Hz outlet.
• Is the tap water supply valve locked? Please open the tap water supply valve.
• Is the product too close to the wall? Keep the product at least 10 cm away from the wall.
Hot water is not being
dispensed.
• Is the hot water lock indicator turned on? Turn off the hot water lock function.
• Is the tap water supply valve locked? Open the tap water supply valve.
• Is the power connected?
Check that the power cord is plugged into a
220 V - 240 V~, 50 Hz outlet.
• Is there leakage or flooding of hot water? Please request for repair service.
• When you selected hot water extraction, did you
hear a warning sound and water could not be
extracted?
This is an automatic shutoff function to prevent
overheating of the heater inside the product.
After a while, you can extract hot water again.
Water does not come
out or the drained
quantity is different
than before.
• Isn’t it time for filter replacement? Please request for filter replacement.
• Is the device disconnected from the water supply
or is the tap water supply valve locked?
Open the tap water supply valve.
• Is the hose bent or cut? Unfold the hose correctly.
Water leaks.
• Is there no water from the inside of the product?
After closing the tap water supply valve, ask for
maintenance service.
The device stops
suddenly.
• Is the water supply intact? Please check the tap water supply valve.
• Is the power connected?
Check that the power cord is plugged into a
220 V - 240 V~, 50 Hz outlet.
• Is there leakage or flooding of filtered water? Please request for repair service.
▶
Filter replacement / Service inquiry : 603-20591000
The water purifier may operate abnormally because the user is unfamiliar with the product or
due to some other reasons and not because of a product malfunction. In such a case, problems can be
easily solved without help from the service center by checking the following.
If the problem is not solved after checking the following, please call the service center.