Coway CHP-590N, Руководство пользователя

Страница: 28 / 32

Water Filtration System Performance Data Sheet
Model: CHP-590N
This system has been tested and certified by the Water Quality Association according to NSF/ANSI 42 and 53 for
the reduction of the substances listed below and NSF/ANSI 372 for lead-free compliance. The concentration of
the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI 42 and 53.
Substance
Influent challenge
concentration
(mg/L unless specified)
Maximum permissible
Product water
concentration
(mg/L unless specified)
Percent reduction (%)
Aesthetic Chlorine 2.00 ± 10% ≥ 50% Reduction 98.0
Particulate, Class I particles
0.5 to < 1 μm
at least 10 000 particles/
mL
≥ 85% Reduction 98.5
Turbidity 11 ± 1 NTU 0.5 NTU 99.3
VOCs 3.00 ± 10% ≥ 95% Reduction 99.9
While testing was performed under laboratory conditions, actual performance may vary.
General Operating Information:
Rated Capacity
770 L (for VOC)
20,770 L (for Aesthetic Chlorine)
Min-Max operating pressure: 69 kPa ~ 827 kPa
Min-Max feed water temperature: 5 ºC ~ 35 ºC
Rated Service Flow 1.89 L/min
Electrical Requirements: 220 V~ 60 Hz
• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system.
• Refer to the owners manual for specific installation instructions, manufacturer’s limited warranty, user
responsibility, and parts and service availability.
• For parts and service availability, please contact your CODY or call center.
Model of Filter Type
CNFN14 NEO-SENSE FILTER
CNTFN14 NANO-TRAP FILTER
CIFN14-D-PLUS PLUS INNO SENSE FILTER (D)
CAF-03 ANTIBACTERIAL FILTER ** * Separate labeling in the manual
** The Antibacterial filter contains silver, which is known to inhibit the propagation of microorganisms and to
maintain the integrity of the filter.