Coway CHP-01AL, Руководство пользователя

Страница: 18 / 64

17
Operational Principles
Power Part
Power Part
1
Rating Voltage
120Vac 60
㎐
2
Power Transformer
Configurations of Main Part
-
Hot Water Selection Switch
As the switch is “On”, heating mode is selected
and Heater starts to hot water temperature.
-
150
℉
(
65
℃
) Hot Water Selection Switch
As the switch is “On”, 150
℉
(65
℃
) heating mode is
selected
and hot water temperature is controlled under
150
℉
(
65
℃
).
-
Cold Water Selection Switch
As the switch is “On”, cooling mode is selected
and compressor starts to cold water temperature.
-
Cold II Cold Water Selection Switch
As the switch is “On”, Cold II cooling mode is selected
and it is used for extending cold water.
Tact Switch
- Hot Thermistor : 95
℃±
3%, Rth=15.78
㏀
- Cool Thermistor : 4
℃±
2%, Rth=133.5
㏀
- Water Level Sensor (Low/Middle/High) : Reed switch
- O/F Sensor : Sensing the overflow
- LPS : Sensing the flow of Feed water
- UV CDS : Sensing the lighting of UV Lamp
Input Controller
Note Specification Component
S1 23.1Vac 1.5A
S2 12.5Vac 0.5A
±
15% of rating voltage
CHP-01AL
Secondary Primary Model
3
Fuse
15A 250Vac (Littelfuse : 65TS)