Covidien Nellcor Series, Руководство оператора

Страница: 65 / 160

External Data Communication
Operator’s Manual 5-7
Figure 5-4. Trend Data Download Option
4.
Connect a mini-USB cable from the monitoring system to the computer.
a.
Grasp the mini-USB end of the cable.
b.
Firmly insert into the bottom mini-USB data port.
c.
Firmly insert the USB end of the cable into a USB port on the host system.
5.
Ensure the computer properly identifies the monitoring system. If it does not, follow the
procedure for loading the appropriate driver. Reference
To install a USB driver from the
compact disc , p. 5-11.
6.
Launch HyperTerminal. Reference p. 5-8 .
7.
Press the knob again, since the item highlighted is the Start option.The status bar indi-
cating total percentage of the download appears, and the Start option immediately
changes to a Cancel option.

Note:
Users may choose to cancel the download operation at any point in the download
process by selecting
Cancel and then Return .
Figure 5-5. Trend Data Download Status
8.
Confirm the monitoring system is sending trend data to a personal computer (PC) by
observing the computer screen for a scrolling trend data record. If no trend data values
appear, check connectivity and ensure the personal computer contains HyperTerminal
software. If this is all operational, verify patient trend data history exists on the monitor-
ing system. Contact Technical Services or a qualified service technician for assistance.