manualshive.com logo in svg

Covidien Nellcor GR101704, Руководство по обслуживанию

Поделиться
Скачать
Covidien Nellcor GR101704 Скачать руководство пользователя страница 227

Front Panel Components Replacement

 Service Manual

 12-39

12.7.2

LCD Assembly with Overlay Replacement

WARNING:
The LCD panel contains toxic chemicals. Do not touch broken LCD panels. 
Physical contact with a broken LCD panel can result in transmission or 
ingestion of toxic substances.

To remove the LCD Assembly

1.

Disassemble the monitoring system chassis. Reference 

Monitoring System Chassis 

Disassembly

, p. 12-17.

2.

Move the rear enclosure off to the side, retaining the front panel on a static-free 
working surface.

3.

Follow the steps for disconnecting the speaker. Reference 

To remove the alarm 

speaker

, p. 12-38.

4.

Follow the steps for disconnecting both antennae PCBs. Reference 

To remove the 

Antennae PCBs

, p. 12-35.

5.

Follow the steps for removing the Main PCB, setting it aside on a static-free 
working surface. Reference 

To remove the Main PCB

, p. 12-33.

6.

Remove the three T-15 torx screws from the plastic LCD clamp plate.

7.

Gently lift and set aside the plastic LCD clamp plate, ensuring all flex cables remain free.

Содержание Nellcor GR101704













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды