Covidien Force FX-C, Руководство пользователя

Страница: 42 / 130

Quick Setup Instructions
4-2 Force FX Electrosurgical Generator C User’s Guide
Quick Setup Instructions
If you are familiar with the Force FX-C generator, you may prefer to follow this
abbreviated procedure.
If, however, you are not familiar with how the generator should be set up, detailed
instructions follow this chapter.
1. Plug the generator power cord into the rear panel receptacle.
2. Plug the generator power cord into a grounded wall receptacle
3. Turn on the generator and verify that the self-test is successfully completed.
4. Prepare for bipolar, monopolar, or ultrasonic electrosurgery:
To prepare for bipolar or monopolar surgery:
• If using a footswitch, connect it to the appropriate Valleylab footswitch receptacle on
the rear panel.
• Connect the instrument to the appropriate instrument receptacle on the front panel.
• For simultaneous coag monopolar surgery, connect a monopolar accessory or a CUSA
handpiece with CEM nosecone to the Monopolar 1/CEM Instrument receptacle.
Connect a second monopolar accessory to the Monopolar 2 Instrument receptacle.
• For monopolar surgery only, apply the patient return electrode to the patient and
connect it to the Patient Return Electrode receptacle on the front panel.
• Verify or change the mode and power settings.
(Optional – Press the Recall button on the front panel to display the previously used
settings.)
To prepare for ultrasonic surgery:
• Assemble and sterilize the CUSA handpiece and CEM nosecone. Set up the CUSA
System.
• If using a footswitch, connect it to the Monopolar 1 Footswitch receptacle on the rear
panel.
• Apply the patient return electrode to the patient and connect it to the Patient Return
Electrode receptacle on the front panel.
• Connect the handpiece to the Monopolar 1/CEM Instrument receptacle on the front
panel. For simultaneous coag, connect a monopolar accessory to the Monopolar 2
Instrument receptacle.
• Verify or change the Low cut or Desiccate coag power settings.