EHB-120
USER MANUAL
v1.0
1723 W. 4th Street Tempe Arizona 85281
P
: 800.638.6104 |
F
: 480.966.6728 |
E
www.covid.com
Page 4
Operation Controls and Functions
Transmitter
1. POWER: This LED illuminates when the device is connected with power supply.
2. DC 24V: Plug the 24V DC power supply into the unit.
3. HD BaseT OUT: Standard HD BaseT signal output port. Connect HD BaseT receiver with a category
cable
following the standard of direct interconnection method.
4. HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
5. IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
6. IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
7. RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
8. Connection Signal Indicator Lamp
*Illuminate: The Transmitter and Receiver are in good connections status.
*Flashing: The Transmitter and Receiver are in poor connections status.
*Dark: The Transmitter and Receiver are not connected.
9. Data Signal Indicator Lamp
*Illuminate: The HDMI signal with HDCP.
*Flashing: The HDMI signal without HDCP.
*Off: No HDMI signal.
