Panel Descriptions
REAR PANEL LAYOUT
REAR PANEL
1. INPUT:
HD-15 Connector accepts the input
signal.
2. LOCAL OUTPUT:
HD-15 connector provided for
the local monitor. All ID bits are connected from
the input.
3. OUTPUT:
HD-15 Connectors are provided to
connect to display devices.
4. POWER ON LED:
LED will light when power is
applied to the device.
5. AC IN:
Power in accepts 12 VAC from a Wall
Mount power cube.
4
Operational Setup
Turn off all equipment before connecting or removing ca-
bles.
1. Connect the video source signals to the input.
Connect the monitor to the output labeled local
monitor.
2. Connect the video outputs to the displays.
3. Power up the unit and check power on LED indi-
cator.
4. The unit is now operational. Turn on your video
source and finally the display monitors.
5
