PRODUCT SETUP
9
When turned on, the blue LED will light up for 70 seconds, then the Virtual
Wall turns into waiting mode. When the robot is working, the Virtual Wall
will turn on and show blue LED light.
The LED light will blink when the Virtual Wall battery is running low. The
Virtual Wall can be charged by the robot charging base as below
o
Press the slide out the DC plug from charging base (make sure
charging base is se
t to “ON”)
o
Plug in Virtual Wall DC inlet to the DC plug
o
When charging is complete, LED will glow continuously
When robot is cleaning, position the Virtual Wall at least 3 ft away
from Charging Base, and avoid facing Charging Base directly
The effective distance of Virtual Wall barrier is 10 ft
