between the interval of signal disappearing and scanning restarting, the radio will
keep staying on that channel if it receives any signals during the delay time.
The working channel of the radio will revert to the following channels automatically when you
press PTT button during scanning. The dealer can select one among the following six options.:
1) Start channel
When pressing PTT button, the radio will transmit from the channel described in the Start.
2) Selected channel
When pressing PTT button, the radio will transmit from the channel selected.
3) Last called
When pressing PTT button, the radio will transmit from the last channel that received a call.
4) Last used
When pressing PTT button during the scanning, the radio will transmit from the last channel you
used to talk.
C ) Priority Scan
During scanning, if the priority channel has been set on the radio, when the priority channel
receives signals the radio will automatically switch to the priority channel even the normal
channel is receiving signals at that time. And the radio will stay on the priority channel till the
signals disappear. The dealer can set the delay time between signal disappearing and continuing
scanning.
Temporarily Delete Noise Channel When scanning pauses on a channel, press and hold the button
programmed as “Temporarily Delete Noise Channel” to delete this channel temporarily from the
scanning list.
Note: The priority channel cannot be deleted.
FCS
You could enter FCS scan by FCS key during scanning. During FCS scanning, the
radio checks signals on each channel. If no signal have checked on the current channel,
the radio will transmit designed tx time on the current, then turn to rx. When all
the channel have scanned and on signal received,
FCS Carrier Squelch
When this is enabled, the radio need only detect carrier for it to land on a channel and unmute.
Channel Locked during Scanning
If enabled, the channel switch can not move the channel to other channel during FCS scan.
FCS Resume Time
Selects the amount of time the radio is still on the current channel when carrier or QT/DQT have
disappeared. This pause allows the user to ptt on the channel or avoid information not heard on the
channel when the single is very poor.
17
