2
、
Preparation
2.1
Charging the Battery
Plug the power adapter into the proper AC wall outlet; and insert the cable of the power adapter
into the adapter socket on the charger; Red LED flashes after it enters normal work.(Red LED
lights per 3 seconds)
Insert the battery or the radio to be charged into the charger slot. Turn off the radio before
insert it into the charger.
Make sure the battery is in good contact with the charger terminals. When the red indicator lights,
the charger begins to charge the battery.
After charging for about 3 hours, the red indicator turns dim and the green indicator lights
indicating the battery has been fully charged.
Leave the battery in that sate of green indicator for 1~2 hours before you remove it from the
charger to achieve the best performance of the battery. Then you can disconnect the power adapter
from the AC outlet.
Red LED flashes quickly ( Red LED flashes 0.2s per 0.4 seconds) when charging temperature or
circuit is abnormal and the charger enters protection state. Please stop charging in such situation.
Remove the batter from the charger and cut off charger power.
4
