background image

Protected Record/Record Stop 

 

The difference between this key with “Normal Record” is the voice record cannot be deleted by 

pressing “Record Delete” Key. The amount of protected record information is set by your dealer. 

 

 

Record Play/Play Next/Play Stop 

 

It is used to play back recorded voice. The latest record will be played when the key pressed. You 

could press it again to hear next record. When all the records have been played, it will stop. You 

need to press it again to enter play again 

 

Record Delete 

 

You could delete the record from the radio when the record is playing. But it is not allowed to 

delete protect record. 

 

Surveillance 

Press this key to disable or enable Surveillance function. 

When this function is enabled, the beep is not heard and the LED does not light when a signal is 

received, or a key is pressed.

 

 

 

 VOX (Voice Operated Transmission) 

 

VOX allows hands-free transmission on the radio when using the appropriate earphone/headset. 

Two types of VOX are available: built-in and external. 

If VOX has been set, when speaking voice reach the preset volume, VOX will activate the radio to 

transmit automatically.   

 

 

 Radio Setting 

TOT (Time-out Timer)   

1) TOT dispatch time 

The TOT Dispatch Time is the maximum period of time that the radio is allowed to transmit 

continuously in normal dispatch mode. When the programmed time expires, the radio generates a 

warning tone and stops transmitting. The range for the TOT Dispatch Time is from 15 seconds to 

1200 seconds in step of 5 seconds.. 

 

2) TOT Re-key 

   

a) TOT re-key specifies the time when transmission is prohibited after the time-out timer is 

activated. 

    b) During the time of transmitting prohibition, if you press the PTT button, warning tone sounds 

Содержание CU560-2
























Отзывы: