background image

 

 

Instruction Manual 

FM Portable Radio 

 

Thank you for purchasing a 

COVALUE

 two-way radio. This simple to use radio adopts the latest 

advances in technology, providing reliable communication in today’s demanding communication 

environment.  

 

Notice to the User: 

·

  Please read this instruction manual before operating this radio.   

·

  It’s prohibited to use the radio or charge it at any area with a potentially explosive atmosphere 

(where the air contains gas, dust and smog, etc.), as well as while taking on fuel, or while 

parking at a gasoline service station; or any area where radio communication is prohibited 

(such as a hospital or a airport.) 

·

  It’s prohibited to operate the radio without permission in areas where the government laws 

prohibit radio communication. 

·

  Please don't expose the radio to direct sunlight for a long time; don't place the radio near any 

heating devices, either. 

·

  Please don't put the radio in extremely dusty, moist humid areas or unstable surfaces. 

·

  Only qualified personal, with proper tools and instruments are allowed to service and repair the 

radios, do not disassemble the radio by yourself to avoid damages. 

 

FCC Warning

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation. Any 

Changes or modifications not expressly approved by the party responsible for compliance could 

void the user’s authority to operate the equipment.

 

 

IC Warning : 

This device complies with Industry Canada licence-exempt RSS 

standard(s). Operation is subject to the following two conditions: 

(1)

 

this device may not cause interference, and (2) this device must   

accept any interference,including interference that may cause undesired   

operation of the device.   

Under Industry Canada regulations, this radio transmitter may only   

CU500-2  CU510-2

Содержание CU500-2



























Отзывы: