2-Person Assembly
15 Minutes Assembly Time
1. Choose an assembly location that is flat and in close
proximity to where product will be used.
2. To prevent scratching of finish, assemble on
clean, soft surface such as carpet or cloth.
3. Remove all packing material, staples, and packing
straps from the carton. Carefully unpack product.
4. Review Part List and Hardware List and ensure all
components are present and in good condition. For
missing or damaged components contact:
1. KEEP ALL HARDWARE OUT OF REACH OF
CHILDREN.
2. TO AVOID ANY RISK OF SUFFOCATION TO
CHILDREN AND ANIMALS, DISPOSE, PLASTIC
PACKING MATERIAL IMMEDIATELY.
1. Prior to each assembly step, identify the required parts
and hardware.
2.
DO NOT
over-tighten hardware, damage may occur.
3.
DO NOT
use power tools during assembly.
4.
DO NOT
sit or stand on partially assembled product.
1. Rated for residential (non-commercial) use only.
2. Product holds a maximum of 250lbs exceeding
this limit damage
on produc
t and may cause injury.
3. Keep fingers away from hinged area of product.
4. Product is designed for use by one person at
a time.
5.
DO NOT
use product if any component becomes
damaged. Check all hardware periodically and re-tighten
as necessary.
6.
DO NOT
stand on product. Use only for intended
purpose.
7.
DO NOT
drag product across floor. Exercise care when
moving product.
8.
DO NOT
place hot items directly onto product surface.
90.
DO NOT
use harsh abrasives or commercial cleaners.
Wipe with soft, damp cloth.
10.
DO NOT
allow liquid of any kind to remain on product.
Absorption may cause surface damage.
ASSEMBLY REQUIREMENT
ASSEMBLY PREPARATION
SAFETY PRECAUTION
ASSEMBLY PRECAUTION
CARE AND USE
MADE IN VIETNAM
5535/Crestview WOOD CHAIR
Page 2 of 6
Содержание 5535
Страница 1: ...Page 1 of 6 5535 Crestview WOOD CHAIR ...