PAGE 2 OF 3
STOP
DON’T RETURN TO STORE!
Cleaning and Maintenance
Ǹ
Wash frame parts with mild soap and water, rinse thoroughly,
and dry completely. Do not use bleach, acid, or other solvents
on the frame parts.
Ǹ
Inspect and tighten all bolts and fasteners on a regular basis
to ensure proper performance and safety of your stand.
Ǹ
When moving the stand, lift. Do not drag this stand.
Ǹ
We recommend the use of furniture covers when not in use.
Ǹ
In order to prolong the life and beauty of your stand, we
recommend that it be stored in a dry and protected area
during off season periods.
Step 6:
See Full Assembly.
FULL ASSEMBLY
FIGURE 2
FIGURE 3
Step 3:
Put the mesh frame B (#5) into the holders located on the
legs (#1, #2). See Figure 3.
Step 4:
Fasten the upper story back (#6) to the legs (#1, #2) by using
bolts (#8) and washers (#9). See Figure 4.
Step 5:
Put the mesh frame B (#5) into the holders located on the
legs (#1, #2). Make sure that all of the bolts have been
tightened completely and cover them with bolt caps (#10, #11).
See Figure 5.
FIGURE 5
Step 2:
Put the mesh frame A (#4) into the holders located on the
legs (#1, #2) by using bolts (#7) and washers (#9). Keep the
bolts loose. See Figure 2.
FIGURE 4
7
4
1
1
1
1
2
2
5
5
1
2
2
6
2
2
5
5
4
10
9
RE 3
1
2
5
1
2
6
8
11
9
5
1
5
LY
16
#7 BOLT M6*16
25
#8 BOLT M6*25
