PARTS LIST
FIGURE 1
Before assembly, open all of the packaged cartons.
Lay out all of the parts on a level, non-abrasive
surface. Open the hardware kit for all of the nuts,
bolts, and washers. Make sure that you have all of
the parts listed. If any parts are missing or
damaged, call the help line at 1-877-539-7436 before
returning this item to the store.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Fasten the frame A (#2) and the frame B (#3) to the
rear frame (#1) by using bolts (#10). Keep the bolts
loose. See Figure 1.
Note: Parts come in more than one carton.
Note:
The labels marked “2” and “3” on the frames should
coincide with Figure 1 to ensure proper assembly.
TRS42GN-CS10-3
TRS42GN-CS04-J
TRS42GN-CS04-K
TRS42GN-CS10-9
TRS42GN-CS10-5
TRS42GN-CS05-1
REAR FRAME
FRAME A
FRAME B
BOTTOM FRAME
TABLE TOP
PART
NO. MATERIAL CODE
PART
Q’TY
PART
NO. MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
1
1
1
1
1
1
FRONT DOOR
17C40A0714001YX
BOLT M6*40
4
17C40A0705001YX
17C40A0709001YX
17KAA0101----Y4
TRA48GH-CS24-2
BOLT M6*15
BOLT M6*25
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 10MM
GLASS
SCREW ST4.8*16
CROSS BRACE
TOUCH-UP
PAINT FOR TABLE TOP
6
4
1
17KAC3101----Y3
1
1
1404046
1
17
62TCS40GKQ102
1
18
17C17A1506001YX
2
37XA4931
COVER
1
40
#10 BOLT M6*40
17TAN00030
17XAA103
LOWER CONNECTOR
UPPER CONNECTOR
1
1
9
10
1
2
3
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #13)
- Hex. Key Wrench (See Part #14)
E-2
PAGE 3 OF 8
