FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the
underside of the
table top
(#1) rim by using bolts (#4). Keep the bolts loose.
See Figure 1.
HEX. KEY WRENCH 10MM
BOLT M6*20
BOLT M6*15
LEG
CENTER CONNECTOR
TABLE TOP
17KAC3101----Y3
17C40A0708001YX
17C40A0705001YX
62TMS20SKY101
TRS19SA-CS04-1
4
4
1
TRS19SA-CS05-1
4
8
7
5
HEX. KEY WRENCH 4MM
17KAA0101----Y4
1
6
1
4
1
3
2
1
Q’TY
PART
MATERIAL CODE
PARTS LIST
PART
NO.
Q’TY
PART
MATERIAL CODE
PART
NO.
TRS19SA
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2
COURTYARD CREATIONS INC.
#4 BOLT M6*15
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly.
2
2
2
2
4
1
15
!
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
TOUCH-UP
PAINT FOR TABLE TOP
1
1404046
E-2
