PAGE 1 OF 2
V-3
COURTYARD CREATIONS INC.
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Fasten the legs (#2) to the
underside of the top frame (#1) by using bolts (#3).
Make sure that all of the bolts have been tightened
completely. See Figure 1.
CUSHION
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
BOLT M6*15
LEG
TOP FRAME
61T28JTC00001BA
17KAC3101----Y3
TTS27JT-CS02
17C40A0705001YX
62TMS28JTX101
1
17KAA0101----Y4
1
1
6
5
4
8
3
1
4
2
1
Q’TY
PART
MATERIAL CODE
PART
NO.
Q’TY
PART
MATERIAL CODE
PART
NO.
PARTS LIST
TMS28JT
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
2
2
2
2
1
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP
DO NOT RETURN TO STORE!
FIGURE 1
3
3
