PAGE 2 OF 2
Step 4:
Turn the table to its upright position. See Figure 4.
Note:
To use an umbrella with this table, remove the plastic
center plug and put the umbrella pole through the table
top (#1) and center connector ring (#4).
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• Wash glass with mild soap and water, rinse thoroughly, and dry completely.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your table.
• When moving the table, remove the umbrella and lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected
area during off season periods.
• Tempered glass has been used for increased strength and safety of your table. However, during windy
conditions the umbrella should be lowered and/or removed.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
FIGURE 2
FIGURE 4
FIGURE 3
Step 2:
Fasten the center connector (#5) to the middle of the
legs (#3) and the supports (#2) by using bolts (#7),
washers (#8), and plastic nuts (#9). Keep the bolts
loose. See Figure 2.
Step 3:
Fasten the center connector with ring (#4) to the
middle of the legs (#3) and the supports (#2) by using
bolts (#7), washers (#8), and plastic nuts (#9). Make
sure that all of the bolts have been tightened completely
and cover them with bolt caps (#10). See Figure 3.
3
3
3
3
3
3
3
3
7
8
8
9
10
7
8
8
9
10
2
2
2
2
5
4
STOP
DON’T RETURN TO STORE!
