PARTS LIST
PART
NO.
PART
QT’Y
PART
NO.
PART
QT’Y
1
1
1
1
2
2
4
7
12
12
12
1
1
24
8
9
10
11
12
2
3
4
5
6
TGS62HS-CS05-1
TGS62HS-CS04-2
TGS62HS-CS04-1
62TGS62HSY101
62TGS62HSY102
17C17A0403001Y4
17C01A0721091Y4
17FA05040301-Y4
18000C23001
18000337002
17KAB1101----Y4
17KAA0201----Y4
TABLE TOP
LEG
SUPPORT
CENTER CONNECTOR
CENTER CONNECTOR WITH RING
SCREW ST4.2*12
BOLT M6*60
WASHER d6.5*D13*1.0
BOLT CAP M6
HEX.KEY WRENCH 6MM
PLASTIC NUT M6*P1.0
NUT WRENCH 10&13MM
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Insert the legs (#3) and the supports (#2) into the
plastic holders on the table top (#1) rim by using
screws (#6). See Figure 1.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS62HS
-WM
COURTYARD CREATIONS INC.
!
!
!
!
!
!
!
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #11)
- Nut Wrench (See Part #12)
MATERIAL CODE
MATERIAL CODE
FIGURE 1
3
6
3
3
3
2
STOP
DON’T RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
PAGE 1 OF 2
2
1
