PAGE 2 OF 9
Keep the appliance area clear and free from
"
;+ <
Fireplace.
"
#
$ %
"#
is specified in this manual.
# "
#
"#
specified in this manual.
The burner should always be cleaned:
Disconnect it from the appliance, use a cleaner to
=
= "
% "
% "
technician to inspect the appliance and to replace
any part of the control system and any gas
% % "
This appliance is for outdoor use only in a
%
"
%
%
illustration(s) depicting the cylinder mounted to the
appliance utilizing the cylinder retention means and
%
"# @B
in diameter and 18 inches high. The capacity is
BJ "
Locate the gas hose and make sure that it is not in any
%%
% !"
off at the supply cylinder.
;
appliance.
- %
area out of children’s reach.
"
#
%")
the ones specified in this manual.
#
% %"
The cylinder used must include a collar to protect
"
The Procedure for Checking for Gas Leaks:
& =%"
gas tank is changed, you must check for gas leaks.
Follow these three steps:
@"Q=$
detergent and one part water.
B"Q=
source.
3. Apply the soap solution to all gas connections,
especially to the inlet/manifold pressure tap on the
"[%
appear in the soap solution if the gas connections
"=
tighten gas connections, turn off the gas at the
source, disconnect the fuel line from your fireplace
and call 1-877-539-7436 for repair assistance.
WARNING
"
WARNING
"
WARNING
"
WARNING
"
The LP-gas supply cylinder to be used must be:
1. Constructed and marked in accordance with the
U.S. Department of Transportation (D.O.T.)
Specifications for LP-Gas Cylinders, or the
; - ; #
Transportation of Dangerous Goods; and
--&]-;[^^_`
B" % `
and;
^" %
% "
#
with the ANSIZ21.97 and CSA 2.41-2014.
The installation must conform to local codes or in
&+
<-&;vBB^"@-&]-<[@{_"B"
