5
1
2
2
2
2
FIGURE 1
PAGE 1 OF 2
COURTYARD CREATIONS INC.
STOP
DON’T RETURN TO STORE!
Attention:
Make sure that each bolt needed for all steps match
the corresponding figure to ensure proper assembly.
STEP 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with the underside facing upwards.
Fasten the legs (#2) to the plastic holders attached
on the table top rim by using screws (#5).
See Figure 1.
NUT WRENCH 10&13MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
PLASTIC NUT M6*P1.0
WASHER d6.5*D13*1.0
BOLT M6*60
BOLT M6*40
SCREW ST4.2*12
U-SHAPED WASHER
CENTER
CONNECTOR WITH RING
LEG
TABLE TOP
17KAB1101----Y4
1800337002
17KAA0201----Y4
1800C23001
17FA05040301-Y4
17C01A0721091Y4
17C01A0714003Y4
17C17A0403001Y4
27LA09076
62TGS38HSY101
TGS36HY-CS02
TGS38HS-CS01
1
1
8
8
16
4
11
10
12
9
8
7
4
4
4
1
6
1
4
5
4
2
3
Q’TY
Q’TY
1
PART
PART
MATERIAL CODE
MATERIAL CODE
PART
NO.
PART
NO.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS38HS
-WM
PARTS LIST
You will need the following tools:
- Phillips Screwdriver (Not included)
- Nut Wrench (See Part #12)
- Hex. Key Wrench (See Part #11)
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
!
