PAGE 2 OF 2
Cleaning and Maintenance
Wash frame parts with mild soap and water,
rinse thoroughly, and dry completely. Do not
use bleach, acid, or other solvents on the frame
parts.
Wash glass with mild soap and water, rinse
thoroughly, and dry completely.
Inspect and tighten all bolts and fasteners on a
regular basis to ensure proper performance and
safety of your table.
When moving the table, lift
.
Do not drag this
table.
We recommend the use of furniture covers
when not in use.
In order to prolong the life and beauty of your
table, we recommend that it be stored in a dry
and protected area during off season periods.
Step 4:
Turn the table to its upright position. See Figure 4.
FIGURE 4
FIGURE 3
FIGURE 2
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
Step 2:
Fasten the legs (#2) to the underside of the table
top (#1) rim by using bolts (#4) and washers (#6).
Keep the bolts loose. See Figure 1 and Figure 2.
Step 3:
Fasten the center connector with ring (#3) to the
middle of the legs (#2) by using bolts (#5) and
washers (#6). Make sure that all of the bolts have
been tightened completely and cover them with
bolt caps (#7). See Figure 3.
