35
#5 BOLT M6*35
#6 BOLT M6*16
FIGURE 4
FULL ASSEMBLY
FIGURE 2
FIGURE 3
PAGE 2 OF 2
Step 5:
See Full Assembly.
Step 2:
Fasten the supports (#3) to the legs (#2) by using the bolts
(#6) and washers (#7). Keep the bolts loose. See Figure 2.
Step 3:
Fasten the supports (#3) to the table top (#1) by using the
bolts (#5). See Figure 3.
Missing A Part?
No Need To Go Back To
The Store!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
SHOULD YOU NOT LOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECT ALL
PACKING MATERIAL FOR ANY SMALL PARTS THAT MAY HAVE BECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PART IS MISSING OR DAMAGED, PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORE RETURNING THE ITEM TO THE STORE.
PLEASE PROVIDE THE FOLLOWING INFORMATION:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT
TO THE RETAILER.
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP DON’T RETURN TO STORE!
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry frame completely. Do not use bleach, acid, or other
solvents on the frame parts.
• Please inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance and safety of your table.
• When moving the table, do not drag.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we recommend it be stored in a dry and protected area during off
season periods.
4
9
6
7
2
3
16
3
2
NOTE:
1. The arrows mark on the support
s
(#3) must coincide with
Figure 2 to ensure proper assembly.
2. Make sure that the
tabs
on the supports (#3) must be
facing inside to ensure proper assembly.
NOTE:
If the EVA foams on the table top are missing, replace
them with the EVA foams supplied in the hardware kit.
See Illustration A.
Step 4:
Turn the table to its upright position and put the tiles (#4)
onto the table top (#1). See Figure 4.
Tab
3
1
8
5
3
Make sure that all of the bolts have been tightened
completely and then cover them with bolt caps (#8 and #9).
