Step 9:
Hook the suspension spring (#23) to the
top of the swing arm tubes (#10), and do
the same for the other side. See Fig. G.
Step 10:
Hang the other side of suspension spring
(#23) into the hole located on the angled
braces of the top cross beam w/adjustable
teeth (#1). Do the same for the other side.
See Fig. H.
Warning:
Make sure that both ends of the
suspension springs (#23) go completely
through the holes in the angled brace on
the top cross beam w/adjustable teeth
(#1) and wing arm tubes (#10).
Step 11:
Slide the canopy/frame connectors (#24)
into the U-shaped side canopy brace (#12)
and secure with screws (#16). Make sure
that the teeth of cabopy/frame connectors
(#24) are facing towards the inside of the
swing. See Fig I - Step 1 and Step 2.
Step 12:
Insert the front/rear canopy braces (#11)
into the sleeves of the canopy (#29).
See Fig I - Step 3.
Step 14:
Slip the four corners of U-shaped side
canopy brace (#12) into the pockets of the
canopy (#29). See Fig I - Step 5.
Fig. I
Fig. H
Fig. G
PAGE 5 OF 6
Step 5
Step 4
Step 3
Step 1
Step 2
Step 13:
Insert the front/rear canopy braces (#11)
into the U-shaped side canopy brace (#12).
See Fig I - Step 4.
10
10
10
1
23
24
24
29
29
27
16
16
23
10
23
23
23
23
23
23
STOP
DON’T RETURN TO STORE!
29
