50
#15 BOLT M6*50
PAGE 2 OF 4
FIGURE 1
Step 2:
Fasten the support A (#9) to the seat assembly A (#1)
by using bolt (#12). Fasten the support A (#9) to the
left arm A (#2) by using bolt (#13), washer (#16), and
plastic nut (#17). Keep the bolts loose. See Figure 2.
Step 3:
Insert the back assembly A (#3) into the left arm A (#2).
Fasten the back assembly A (#3) to the left arm A (#2)
by using bolts (#15), washers (#16), and plastic nuts (#17).
Keep the bolts loose. See Figure 3.
Step 4:
Place the right arm B (#5) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the seat assembly B (#4) to the right arm B (#5)
by using bolts (#15), washers (#16), and plastic nuts (#17).
Keep the bolts loose. See Figure 4.
FIGURE 2
FIGURE 3
FIGURE 4
1
2
12
13
16
17
15
3
2
2
5
4
16
3
17
50
#15 BOLT M6*50
15
16
17
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the left arm A (#2) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the seat assembly A (#1) to the left arm A (#2)
by using bolts (#15), washers (#16), and plastic nuts (#17).
Keep the bolts loose. See Figure 1.
15
1
2
16
17
50
#15 BOLT M6*50
F-3
9
30
15
#13 BOLT M6*30
#12 BOLT M6*15
