background image

7

6

9

9

9

9

5

11

5

6

8

7

4

3

3

3

3

4

10

PAGE 2 OF 2

Cleaning and Maintenance 

•  Wash frame parts with mild soap and water, rinse 

   thoroughly, and dry frame completely. Do not use 

   bleach, acid, or other solvents on the frame parts.

•  The pillow and sling may be washed on the surface 

   only by using mild soap and water or commercial foaming upholstery cleaner if necessary. If washed, rinse 

   well and hang to dry. Do not machine wash or dry. 

•  We recommend the use of furniture covers to protect your hammock when not in use.

•  Please inspect and tighten all parts on a regular basis to ensure proper performance and safety of your 

   hammock.

•  In order to prolong the life and beauty of your hammock, we recommend that it be stored in a dry and protected

   area during off season periods.

Note: 

Make sure that the suspension chains (#8) are properly 

connected without any twists or tangles.

Note: 

Before each use, inspect the hammock to ensure that 

all parts are in good order and are properly assembled.  

Carefully examine the frame to ensure that all parts 

(including welds) are sound (free of excessive rust or 

cracks). 

FIGURE 2

FIGURE 3

Step 2:

Insert one side beam (#4) through the sleeve of 

magazine bag (#10), then insert the end of the side 

supports (#3) into the side beam (#4). See Figure 2.

Step 3:

Attach the chain connector (#6) and suspension hooks 

(#7) with suspension chain (#8), then insert the brace 

(#5) through one side of skin (#11) sleeve and chain 

connector assembly. Attach the other chain connector 

(#6) and suspension hooks (#7) only, then insert the 

brace through the other side of the skin (#11) sleeve and 

chain connectors. Cover sling braces with brace caps

(#9). See Figure 3.

FIGURE 4

12

7

7 7

4

4

7

7

Step 4:

Hook the entire skin-assembly into the holes of the side 

beams (#4) with the suspension hooks (#7). Make sure 

all hooks pass completely through the side beam until 

you see the hook end at the bottom hole of the side 

beam for a solid assembly. Tie the pillow (#12) to the 

chain connectors (#6) at the higher end of the hammock.

See Figure 4.

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

Call Toll  Free:

TEL: 1-877-539-7436

FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU 

HAVE ALL OF THE PARTS LISTED. 

IF YOU DO  NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 

PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED DURING SHIPMENT.

IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 

PARTS ARE MISSING OR DAMAGED, CALL THE HELP  LINE AT 1-877-539-7436 
BEFORE RETURNING THIS ITEM TO THE STORE.

PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:

1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST 

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT 

TO THE RETAILER.

Отзывы: