FIGURE 6
FIGURE 7
21
22
23
21
22
STOP
DON’T RETURN TO STORE!
PAGE 3 OF 4
Step 8:
Open the side table of the legs A (#3). Secure the table
by pressing out wards at the junction for proper usage
and to avoid damage or injury. See Figure 8.
Step 6:
Press the spring buttons on the cross braces (#6) to turn
the lounge into a bed. The cross braces (#6) have two
sets of holes that you can adjust the reclining lounge to
two different positions. See Figure 6.
Step 7:
Place the cushions (#21 and #22) and pillows (#23)
onto the lounge. Secure the right cushion (#22) to the
left cushion (#21) by using the velcro straps. Then,
secure the cushions (#21 and #22) to the backs (#5)
by using the plastic clamps. See Figure 7.
FIGURE 5
Step 5:
Fasten the seat cross brace (#6) to the backs (#5) by
using bolts (#10), washers (#13) and plastic nuts (#15).
Fasten the seat cross brace (#6) to the leg B (#4) by
using bolts (#10), washers (#13) and plastic nuts (#15).
Do the same procedure for other backs (#5). Make
sure that all of the bolts have been tightened completely
and cover them with bolts caps (#16 and #17).
See Figure 5.
10 17
13
13
15
10
17
13
13
15
5
6
4
4
6
5
5
5
45
#10 BOLT M6*45
FIGURE 8
3
3
Fine
Thick