FIGURE 2
PAGE 2 OF 2
V-3
FIGURE 3
FULL ASSEMBLY
FIGURE 4
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area during off
season periods.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
Step 2:
At the rear of the seat, fasten the seat assembly (#2) to the
back assembly (#1) by using bolts (#5). Keep the bolts loose.
See Figure 2.
Step 3:
Fasten both the left arm (#3) and the right arm (#4) to the seat
assembly (#2) by using bolts (#6). Keep the bolts loose.
See Figure 3.
Note:
The labels marked “L” and “R” on arms (#3 and #4) should
coincide with Figure 3 to ensure proper assembly.
Step 4:
Fasten both the left arm (#3) and the right arm (#4) to the
back assembly (#1) by using bolts (#7).
Make sure that all of
the bolts have been tightened completely.
See Figure 4.
Step 5:
See Full Assembly.
65
5
7
3
4
1
1
2
#5 BOLT M6*65
#7 BOLT M6*35
#6 BOLT M6*15
2
35
Warranty
• This product is covered by Courtyard
Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt)
is required for warranty claims.
• It remains the customer’s responsibility
for freight and packing charges to and
from the service center.
STOP DO NOT RETURN TO THE STORE!
15
3
L
4
6
6
R