CLEANING AND
MAINTENANCE
BEFORE USING FOR THE FIRST TIME
1. Remove all of the various packaging,stickers or accessories from both the
inside and outside of the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the cord
into the notch.
BOILING WATER
1. Open the lid of the kettle, add water and close the lid.
Note: You must add at least enough water to go above
the Min level but less than the Max level.
2. Plug the base into the electrical outlet and place the filled
kettle onto the base. The kettle is on standby and only the
I/O and + & - buttons can be used.
3. Choose the desired water temperature:
• Boil water--Press I/O. The kettle will begin the boiling process.
• Heat water to a specific water temperature--Press + or – and a temperature
appears on the LCD starting with 104°F. Press + or – again to increase or
decrease the desired water temperature. Press I/O and the kettle begins to heat
the water.
Note: If you don’t press I/O within 10 seconds, the kettle returns to standby
mode.
4. At any time during the boiling process, you can increase or decrease the
desired water temperature by pr or –.
5. Once the water reaches the desired temperature, the kettle stops the
process. After approximately 2 minutes, the LED display turns off and the kettle
returns to standby mode.
10
11
CLEANING YOUR KETTLE
• Before cleaning the kettle, make sure it is unplugged from any electrical
outlets. Also, let the kettle cool down before cleaning.
• Do not immerse the kettle, the power cord, power plug, or power socket
into water.
• Wipe the outside of the kettle with a damp cloth.
• Do not use a scouring powder or other cleaning product on the kettle as it
could damage the surface.
DESCALING
To keep the kettle working well, you should descale regularly, preferably at least
once a month or more frequently if your water is very hard.
There are three different ways you can descale your kettle.:
Using white vinegar:
1. Fill the kettle with 2 cups of vinegar.
2. Let the vinegar soak in the kettle for 1 hour. Do not turn on the kettle during
this time.
3. Pour out the liquid and rinse 5 or 6 times.
Using citric acid:
1. Boil 2 cups of water in the kettle.
2. Add 5 teaspoons of citric acid and let it soak for 15 minutes.
3. Pour out the liquid and rinse 5 or 6 times.
Using a descaler:
1. Use a descaler specifically for plastic kettles and follow the manufacturer’s
instructions.
2. Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
CLEANING
AND MAINTENANCE
OPERATING INSTRUCTIONS
OPERATING INSTRUCTION
S
HOLDING HOT WATER AT A SPECIFIC TEMPERATURE
1.
Fill with water up to Max level.
2.
Press the Keep Warm button
,
and press + or – to increase or decrease the
desired water temperature.
Note: The highest temperature that the kettle can hold is 194°F.
3.
Press I/O. The kettle starts the boiling process. When the water reaches the
desired temperature, the kettle holds the water at that temperature for 4
hours.
Note: If you don’t press I/O within 10 seconds, the kettle returns to
standby mode.
At any time during the boiling process, you can increase or decrease the
desired water temperature by pr or –.
